Aluminium radiators · Istanbul
The PerfectRadiator
We extrude aluminium into decorative radiators and towel warmers at our plant in Ümraniye, Istanbul. 18 models, 30 finishes, thermal output rated to EN 442.
0
models
0
finishes
0
heights
0%
aluminium content
Collection
A profile for every wall
Scroll and the collection moves past you. Pick a model and read its technical figures instantly.
Decorative Radiators
CLASS
Wide slices, clean lines
- Thermal output
- 474 W
- Height range
- 270–1870 mm
- Depth
- 40 mm
- Slice width
- 100 mm
Technology
How aluminium handles heat
Extruded aluminium heats far faster than steel bodies and works with less water — which means your boiler runs for shorter cycles.
01
Fast response, low water content
0.09–0.42 litres per slice: the system reaches temperature sooner and saves energy under thermostatic control.
02
Uninterrupted fin transfer
2.10 mm wall thickness in the water channels; heat travels to the fins without interruption thanks to the one-piece profile.
03
No gaskets, no welding
A purpose-designed bushing and interference-fit technique seal each joint without gaskets or welds.
04
Tested at 15 bar
Every radiator is leak-tested at 15 bar. Maximum burst pressure is 18 bar.
Core product properties
- Material
- Aluminium alloy
- Chemical definition
- AlMgSi0.5
- Aluminium content
- 98%
- Conforms to
- EN 573-3
- Thermal conductivity
- 179 kcal/m²h°C
- Corrosion resistance
- Very good
- Specific gravity
- 2.70 g/cm³
- Production method
- Extrusion
- Profile standard
- TS 4992, TS 1164, TS EN 755-1, TS 5247, EN 12020-1
- Surface treatment
- Electrostatic powder coating & anodising
- Surface roughness
- 0.08 mm
- Quality certificates
- TSE, EN 442 NORM
- Max. operating pressure
- 10 bar
- Max. operating temperature
- 90 °C
- Test pressure
- 15 bar
- Max. burst pressure
- 18 bar
Calculator
How many slices, how many watts?
Pick a model and a height, then drag the slice count. Total output, water content and overall length are calculated straight from the catalogue figures.
Total output
CLASS →1,510W
1,300 kcal/h · Δt60 (90-70-20 °C)
- Water content
- 1.50 litres
- Overall length
- 1,000 mm
- Height
- 570 mm
Figures are for Δt60 (90-70-20 °C), derived from the catalogue's per-slice values. Have a room-by-room heat loss calculation done before final selection.
Finishes
30 coating options
Electrostatic powder coating and anodising. Alongside RAL colours: anthracite, chrome, gold and wood-pattern finishes.
Selected
Anthracite
Tones may differ between the catalogue swatch and the coated product. The swatches are indicative only.
In use
Accessories
Valves, casings, electric kits
Thermostatic and straight valves, pipe casings, digital and analogue electric heating elements. Every towel warmer can run on an electric kit.
Valves
Electric kits
Pipe casings
Assembly
Quality
Certified manufacturing
Our production is certified to TSE and the EN 442 norm. The Ayen® trademark is registered with the Turkish Patent and Trademark Office.
EN 442
norm
90 °C
operating temp.
15 bar
test pressure
18 bar
burst pressure
TSE Certificate of Conformity
TS EN 442-1 / 02.04.2015 · Licence no. 121947-TSE-01/03
Trademark Registration
Turkish Patent and Trademark Office · Mark no. 2016 28423
Industrial Registry Certificate
Ministry of Industry and Technology · Certificate no. 665189
Contact
Let's talk about your project
Get in touch for project pricing, dealership and export enquiries.
- Phone
- +90 216 484 06 60
- Fax
- +90 216 484 06 61
- info@ayenradyator.com
- Address
- Dudullu OSB Mah. Des San. Sit. 103. Sk. B 07 Blok Apt. No: 26
Ümraniye / İstanbul
Open in maps ↗ - Working hours
- Weekdays 08:30 – 18:00